Advertisement
getting to know your blender
Fig. 1
A
B
C
D
E
Description of the Appliance
A Handle
B Jug
C Blades
D Base
E Power dial
F Stainless Jug
Caution: Never use the blender without a lid.
using your blender
fig. 2
F
fig. 4
fig. 6
Assembling the blender
Place the base on a dry, stable surface.
Turn the power dial to 0-position.
Place the jug to the base (fig.2)
Operating the blender
Place the base on a stable surface.
Remove the lid (fig. 3) with the ingredients you
want to mix.
Note: The blender can be used for mixing liquids, crushed
fig. 3
Replace the lid (fig. 4) back onto the jug.
Connect the plug to the mains socket.
Rest on hand on the top of blender jar to place lid securely
in place.
Switch on by turning the power dia (fig. 5) to one of the
position. (1,2,3,4,5 or 6)
For controlled cycle operation, press "pulse" button and hold
down for about 2 seconds. release the "pulse" button to stop
running of blade.
Pulse=Manual operation
Put the new ingredients into the refill lid and pour through the
0 = Stop
1 = Slowest speed
hole in the jug (fig. 6).
2 = Slow
Place the refill lid back into the hole in the lid and turn it
3 = Medium speed
clockwise until it click into position.
4 = Fast
5 = Faster
When the blending is finished, switch the power dial (fig. 5)
back to the stop-position"0".
Lift the jug off the base.
fig. 5
If the blender doesn't work please check:
the power is switched on and the blender switch is on the
setting except "0".
the fuse in the plug.
-3-
ice, grinding and grating of fruits and vegetables,
whipping cream, etc.
Important: Do not exceed the maximum
capacity!
Important: Do not operate the blender longer than 2
minutes. After each 2 minutes session the blender must
be allowed to cool down for at least 10 minutes.
troubleshooting
Advertisement
