CARE AND CLEANING
WARNING! Refer to Safety chapters.
NOTES ON CLEANING
STAINLESS STEEL OR ALUMINIUM OVENS
Clean the oven door with a damp cloth or sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materials
as they can damage the oven surface. Clean the
oven control panel with the same precautions.
CLEANING THE DOOR GASKET
Regularly do a check of the door gasket. The door
gasket is around the frame of the oven cavity. Do
not use the oven if the door gasket is damaged.
Contact an Authorised Service Centre.
To clean the door gasket, refer to the general
information about cleaning.
REMOVING THE SHELF SUPPORTS
To clean the oven, remove the shelf supports.
CAUTION! Be careful when you
remove the shelf supports.
1. Pull the front of the shelf support away from the
Clean the front of the oven with a soft cloth with warm water and a mild cleaning
To clean metal surfaces, use a dedicated cleaning agent.
Clean stubborn stains with a special oven cleaner.
Clean the oven cavity after each use. Fat accumulation or other food remains may
Moisture can condense in the oven or on the door glass panels. To decrease the
condensation, operate the oven for 10 minutes before cooking. Dry the cavity with
a soft cloth after each use.
Clean all accessories after each use and let them dry. Use a soft cloth with warm
water and a cleaning agent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using aggressive agents, sharp-edged ob-
jects or in a dishwasher
2. Pull the rear end of the shelf support away from
the side wall and remove it.
Install the removed accessories in the opposite
REMOVING AND INSTALLING DOOR
The oven door has two glass panels. You can
remove the oven door and the internal glass panel