Electrolux EHH9967FOZ User Manual page 12

Table of Contents

Advertisement

Available languages

Available languages

12
www.electrolux.com
The function has no effect
on the operation of the
cooking zones.
4.10 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
4.11 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
4.12 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Touch
Deactivate the hob with
To deactivate the function: activate the
hob with
Touch
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
. Do not set the heat setting.
for 4 seconds.
comes on.
.
. Do not set the heat setting.
for 4 seconds.
comes on.
.
comes on. Touch
Set the heat setting in 10 seconds.
You can operate the hob. When you
deactivate the hob with
operates again.
4.13 OffSound Control
(Deactivating and activating the
sounds)
Deactivate the hob. Touch
seconds. The display comes on and
goes out. Touch
.
comes on. Touch
choose one of the following:
.
- the sounds are off
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
.
• Count Down Timer comes down
• you put something on the control
panel.
.
4.14 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum
electricity loading of 3700 W.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
.
for 4 seconds.
the function
for 3
for 3 seconds.
or
of the timer to
you can

Advertisement

Table of Contents
loading

Table of Contents