Changing The Small Jets; Checking Operation - Miele SmartLine CS 7101 Operating And Installation Instructions

Changing the small jets

 Remove the burner components.
 Unscrew the burner's fixing screws.
 Pull the control knob off.
 Loosen the fixing nuts on the
underside of the appliance.
 Carefully remove the underside of the
appliance.
a
c
a Ignition switch
b Small jet with smaller diameter
c Small jet with larger diameter
 Remove the ignition switch .
 Using a small screwdriver, unscrew
the two small jets  in the gas
fitting.
 Pull out the jets with a pair of pliers.
Conversion to another type of gas
b
 Fit the correct jets securely (see jet
table).
 Secure the jets against inadvertent
loosening with sealing wax.

Checking operation

 Check all gas fittings for leaks.
 Reassemble the cooktop.
 Ignite all burners to check that they
are operating correctly.
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
 Adhere the label supplied with the
jets over the old label stating the type
of gas being used.
67