Download Print this page

Philips SPS1020P/17 User Manual

Outdoor remote control

Advertisement

Available languages

Available languages

Quick Links

EN
Outdoor remote control
SPS1020P
Transmitter
Specifications
Frequency
315MHz
Receiving distance
50 ft in open area (The number may be variable according
to the environment and battery condition.)
Transmitter power input
DC 12V alkaline battery (size 23A)
Receiver power input
AC 125V electrical outlet
Receiver power output
13 Amps / 125 Volts
13 Amps / 125 Volts
1000W
Federal Communication Commission
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference; and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Receiver
Resistive
General purpose
Tungsten
Notice for the USA
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Relocate the receiving antenna.
Increase the separation between equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications made to this device that are not expressly
approved by Philips Consumer Lifestyle may void the user's authority to operate
the equipment.
Installation
1.
Mount the receiver on the wall near a grounded electrical outlet. The
nail or screw head must be extended at least 3/16" out from the wall.
2.
Hang the receiver onto the nail or screw from the slot located at the
back of the receiver.
3.
Plug the power cord of the receiver into the outlet. Then plug the
device cord into the receptacle at the bottom of the receiver.
4.
Pull out the battery isolated film under the transmitter.
Operation
1.
Press ON on the transmitter to turn the receiver on.
2.
Press OFF on the transmitter to turn the receiver off.

Advertisement

loading

Summary of Contents for Philips SPS1020P/17

  • Page 1 Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications made to this device that are not expressly Receiver approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Installation Mount the receiver on the wall near a grounded electrical outlet. The nail or screw head must be extended at least 3/16”...
  • Page 2 Receptor Cualquier cambio o modificación que se realice en este dispositivo que no esté aprobada expresamente por Philips Consumer Lifestyle puede anular la autoridad del usuario para utilizar el equipo. Instalación Monte el receptor en la pared cerca de una toma eléctrica conectada a tierra.

This manual is also suitable for:

Sps1020p