before using your kenwood
4 Snap the cover in place on the
Read these instructions carefully
5 Raise the mixer head.
and retain for future reference.
6 Fit the bowl and turn anticlockwise
Remove all packaging.
7 Lower the mixer head ensuring that
the central metal pin on the mixer
head fits into the hole in the top of
Never operate the potato peeler
the shaft of the rotating plate
without the cover fitted.
Lower the mixer head – if it won't
Do not touch moving parts.
shut, raise the mixer head slightly
The teeth on the inside of the bowl
and turn the rotating plate and try
and cover are sharp, handle with
8 Switch to speed 3. Never exceed
Unplug the appliance before fitting
or removing parts or cleaning.
9 Once the vegetables are peeled,
Only use the attachment for its
switch off and unplug the mixer.
intended domestic use.
10 Raise the mixer head and remove
the bowl by turning clockwise.
Refer to your main kitchen machine
11 Unclip the clips and lift off the cover.
instruction book for additional
12 Remove the vegetables and rinse in
clean cold water.
This appliance conforms to EC
directive 2004/108/EC on
Cut larger vegetables into smaller
Electromagnetic Compatibility and
evenly sized pieces. Larger pieces
EC regulation no. 1935/2004 of
may cause the lid to delatch.
27/10/2004 on materials intended
New potatoes peel faster than old
for contact with food.
before using for the first time
Don't overpeel: the best nutrition lies
1 Wash the parts: see 'Cleaning'.
just under the skin.
Always switch off and unplug before
removing the attachment from the
Dismantle the attachment fully
to use your potato
For easier cleaning always rinse the
parts immediately after use in warm
water, then leave to air dry.
1 Fit the rotating plate inside the
Wipe the mixer with a damp cloth,
2 Add cold water to just cover the
3 Put your potatoes or carrots into
the bowl, (see hints).
Use no more than:
AT444: 1Kg ( 2lb 3 oz)
AT445: 1.5Kg (3lb 5oz)