Do you have a question about the REM250 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Philips/Magnavox REM250
Page 1
Instrucciones ..10 Instructions ... . 19 Thank you for purchasing a Philips Magnavox 4 device universal remote control. This universal remote control will operate your Television,Video Cassette Recorder, DVD, Cable Converter Box or Audio Receiver/Amplifier.
Programming Other Components To control component brands other than Philips/Magnavox, you’ll need to perform the following steps to manually program the remote with codes listed under Manufacturer’s Codes on pages 28 through 37. Or as an alternative, you can use the Auto Scan feature, on page 5, to pro- gram your component codes.
Aim the remote control at the component and press POWER ONCE. It should turn off. If it does not respond, repeat steps 2 and 3, trying each code for your brand until you find one that works. If it still does not work, try using Auto Scan (see below) on how to pro- gram your component.
Page 4
Press and hold SET until the red light blinks twice, then release SET. Enter 9-9-6. The red light will blink twice. Enter first channel, e.g., 07. For some component brands the ENTER key must be pressed after the digits, this will count as a key press.
TROUBLESHOOTING PROBLEM: SOLUTION: Red Indicator Light does not Replace the batteries with two blink when you press a key. (2) "AA" alkaline batteries (see Page 3). The VOL+,VOL- and MUTE Make sure that the volume con- keys are not functional. trol is locked to a component that has volume capabilities and is programmed into the remote...
Need help?
Do you have a question about the REM250 and is the answer not in the manual?
Questions and answers