Changing The Pronto Settings - Philips TSU9400/93 Starter Manual

TSU9400 Starter's Guide
Turning the Control Panel On/Off
Tip Always switch off the Control Panel during transport to avoid the activation of the touchscreen and
battery draining.

Changing the Pronto Settings

Notes It is possible that your installer has blocked the access to the Settings pages. Normally, your
installer has fully programmed your Control Panel and no changes are required.
To open the Settings pages:
• Press and hold the Settings icon
General
Tip
Press and hold the '+' and '–' buttons to decrease or increase the setting faster.
5
Power switch
The Power switch on the
left side of the Control
Panel turns the Control
Panel on and off.
for more than 3 seconds.
To access the other Settings pages:
• Tap the Page +/Page - key.
On the Info Page you can find the version
and network information and memory status.
To change Date & Time settings
1 Tap the Month, Day, Year, or Time button.
The button is highlighted.
2 Tap the '-' and '+' buttons to adjust the
date or time.
To change the Volume settings
• Tap the '-' and '+' buttons to adjust the
volume settings.
The General volume refers to all sounds you
hear when you operate the Control Panel.
The Button volume specifically refers to the
default sound you hear when you press a
button.