Downloading The Configuration File To The Control Panel; Support; Replacing The Batteries - Philips TSU9600/93 Starter Manual

TSU9600 Starter's Guide
Downloading the Configuration File to the
Control Panel
To download the configuration file to the Control Panel, connect
it to your PC with the USB cable enclosed and click the icon
in ProntoEdit Professional.
When you connect the Control Panel to the PC, it will be
recognized by the PC as a removable disk and added in the folder
list of your Windows Explorer as 'TSU9600'. In the right corner of
your Windows taskbar, the following icon
If the Control Panel is not recognized, try the following options:
• Unplug the Control Panel and try again a few seconds later.
• Unplug the Control Panel, reset it and try again.
• Check the USB settings on the PC.
Note The Control Panel uses default Windows drivers for recognition. If the problem is not solved
with the options described above, try installing the latest Service Pack for your Windows
version or check the troubleshooting section of your operating system.
Warnings Do not pull the USB cable out of the PC during transition of the configuration file.
Messages regarding downloading appear in ProntoEdit Professional.

Support

Replacing the Batteries

The batteries in the Control Panel are Lithium ion batteries. It is advised to change the batteries
when the operation of the Control Panel becomes unreliable.
If you want to order new batteries, contact the Philips Service Center.
For more information about the Service Center, please refer to Support on http://www.pronto.
philips.com.
Warning Replace the batteries only with original Philips Pronto TSU9600 batteries; otherwise the
guarantee is no longer valid and hazardous situations could occur.
9
appears.