5 Tap Next to define the code set of your device.
The code set screen appears. When the brand is already defined like in the
default configuration, the code set is displayed.
Press Cancel to exit Brand mode.
6 Enter the code set from the 'Table of Brands' from p. 32 onwards.
In the Table of Brands the brands are ordered alphabetically per device. Some
brands use several code sets for the same device. The code sets in the table
of brands contain only the basic functions of the devices. It is advised to enter
the first code set and try it out. If your device is not responding properly, you
should try out the second code set of the brand. Try out all code sets of the
brand until you can operate the device to your satisfaction.
7 Press OK to define the brand of your device.
When the code set is correct, you will hear a confirmation beep. The IR codes
of the selected device will be installed on the ProntoNEO.
To delete a number, tap
Defining the brand of your device will not erase the commands you have
previously learned to buttons of that device. See 'Learning Commands' on
p. 18 for more details.
on the LCD touch screen.