Table Of Contents; Introduction; Instructions For Use; Installing The Remote Control - Philips SBCRU252/00H Instructions For Use Manual

RU252ok.qxd:RU252.qxd

Instructions for use

Contents
1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Inserting the batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Automatically setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . 56-67
Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

1. Introduction

Congratulations on your purchase of the Philips SBC RU252 universal remote
control. After installing the remote control you can operate a maximum of
2 different appliances with it: TV and VCR/DVD players/recorders.
You can find information about how to prepare this remote control for use in
the chapter 'Installing the remote control'.

2. Installing the remote control

Inserting the batteries

1
Press the cover inwards and slide it in the
direction of the arrow.
2
Place two R03, UM4 or AAA type batteries
into the battery compartment, as shown.
3
Slide the cover back and click it firmly into
place.

Testing the remote control

The remote control has been programmed to operate most Philips
appliances. Because the RU252 may use different signals for each make and
even for different models of the same make, it is advisable to test whether
your appliance responds to the RU252.
The example below (TV) instructs you how to do this. You can repeat the
same steps for other appliances (VCR/DVD players/recorders) which you
want to operate using the RU252.
Example of TV:
1
Turn your TV on manually or use the original remote control.
Tune to channel 1.
2
Press the RU252's TV key to select TV.
3
Check whether all the keys are working. For
an overview of the keys and their functions see '3. Keys and functions'.
- If the TV responds as it should to all of the key commands the RU252 is
ready for use.
• If the device does not respond at all or not to all of the key
commands, follow the instructions under 'Setting the remote
control'.
4
17/08/07 15:56 Page 4