Husqvarna DMS 240 Operator's Manual page 23

• The feed lever is used to adjust the level screws of
the bottom plate and to set the applicable angle of
the drill column.
Drill motor
• The product has 2 gears.
Product overview - drill motor
1
2
3
4
898 - 002 - 20.06.2019
• The product has double insulations.
• The product has an overload protection that
disconnects the power if the drill bit is blocked.
• The water system decreases the temperature of the
product.
Intended use
This product is used to drill concrete, brick and different
stone materials. All other use is incorrect.
The product is used in industrial operations by operators
with experience.
5
7 7
6
8
23