Table of Contents
Advertisement
Quickpower
Switches the device you wish to operate on / off.
Only devices for which the remote control is set up can be
selected.
•
Select 'QuickPower', then select the device to switch
on / off.
Sleep
Sets devices to switch off at a preset time.The switch-off time
can be set in intervals of 15 minutes. Maximum switch-off
time is 90 minutes.
Only devices for which the remote control is set up can be
selected.
•
Select 'Sleep', then select the device(s) to set a switch-off
time for.
•
Press the corresponding side key(s) to set the desired
switch-off time(s).
•
Make sure the remote control points at the device(s) you
have set a switch-off time for.
Macros
Shows available macros, if macros have already been set up.
If no macros are available, you can set up macros here.
For this, refer to chapter 4.4 'Macros'.
Setup
Devices:
allows you to add and delete devices. For this,
refer to chapter 4.2 'Devices'.
Favorites:
allows you to add, edit, reorder, delete and / or
rename favorite channels. For this, refer to
chapter 4.3 'Favorite channels.
Macros:
allows you to add, edit, delete, rename and / or
extend macros. For this, refer to chapter 4.4
'Macros'.
Advanced:
See 4.5 'Advanced options'.
Learn:
See 4.6 'Learning key functions'.
Help
Gives you extra information on how to set up and use your
remote control.
Extra possibilities
9
Advertisement
Table of Contents
