Cabinet And Circuit Board Disassembly - LG DRD-820B Manual

1. CABINET and CIRCUIT BOARD
DISASSEMBLY
1-1. Bottom Cover
A. Release 4 screws (A) and remove the Bottom Cover
in the direction of arrow (1). (See Fig.1-1)
(1)
(A)
Fig. 1-1
1-2. Front Bezel Assy
A. Insert and press a rod in the Emergency Eject
Hole and then the CD Tray will open in the direction
of arrow (2).
B. Remove the CD Tray Door in the direction of arrow
(3) by pushing the stoppers forward.
C. Release 3 stoppers and remove the Front Bezel Assy.
(3)
Stoppers
(2)
Emergency Eject Hole
Fig. 1-2
DISASSEMBLY
(A)
Bottom Cover
(A)
(A)
CD Tray Door
CD Tray
Front Bezel Assy
1-3. Cabinet and Main Circuit Board
A. Remove the Cabinet in the direction of arrow (4).
(See Fig. 1-3)
B. Release 2 hooks (a) and remove the Clamp in the
direction of arrow (5).
C. Push stopper (b) and remove the CD Tray drawing
forward.
D. Remove the Main Circuit Board in the direction of arrow
(6).
E. At this time, be careful not to damage the 4 connectors,
are positioned at left side, of the Main Circuit Board.
Clamp
(5)
Stopper(b)
Fig. 1-3
2. DECK ASSY DISASSEMBLY
A. Release 4 screws (C).
B. Separate the Pick-up Unit.
(C)
Pick-up Unit
(C)
Fig. 1-4
Cabinet
(4)
Hooks(a)
(6)
Main
Circuit Board
(C)
(C)
5