Delete A Device - Philips SRT8215/10 User Manual

When in step 1 of the Add a
device type, but the brand is not recognized ...
or
When in step 2 of the Add a
control you normally use to switch off (standby) your device, but the signals were
not recognized ...
the copy the buttons page opens with a highlighted button on the on-screen
Prestigo remote control image.
Then,
1
Press and hold the button on your remote that corresponds with the highlighted
button on the Prestigo image.
2
When the highlighted button turns green, release the button on your remote
control.
The button is copied to your Prestigo.
The next button is now highlighted on the Prestigo image.
3
Repeat steps 1 and 2 for all buttons on your Prestigo.
Tip
You can skip buttons that you do not use on your remote control, or
manually select another button on the Prestigo image.
4
Click Save.
The buttons are saved to your Prestigo.
5
Click Done.
Your device is added.
You return to the Devices tab.
It is now safe to disconnect your Prestigo and try out the device you added, using
your Prestigo. Should you experience any problem with a button, you can use the
Help button on your Prestigo.

Delete a Device

1
Go to the Devices tab.
2
Hover over the device you want to delete.
A Delete pop-up button appears.
3
Click the Delete pop-up button.
A pop-up window appears.
4
Click Yes.
Warning
The device and every activity using the device is deleted. So, if you
want to add, for example, a new TV: first add the new TV, then
update the Activities and finally delete the old device from your
Prestigo.
-or-
Click No.
You return to the Devices tab without deleting the device.
Device-wizard you fill in your brand and select the
Device-wizard you press the button on your remote
8