Subscribe to Our Youtube Channel
Related Manuals for Doran 4100XL
Summary of Contents for Doran 4100XL
- Page 1 Model 4100XL Digital Scale OPERATOR MANUAL DORAN SCALES INC. 1315 PARAMOUNT PKWY. 1-800-262-6844 FAX: (630) 879-0073 http://www.doranscales.com MANUAL REVISION: 0.0 MAN0198 5/15/2000 Made in USA...
- Page 2 Be sure the AC power is not excessively noisy - this can occur if large inductive loads, such as solenoids or motors, are on the same power line. The Model 4100XL has a filtered power supply to reduce the effects of normal line noise, but they cannot limit severe fluctuations. If problems occur, noise producing devices may have to be suppressed to minimize their effect.
- Page 3 With ease of use and setup in mind, the scale is simple to set up and ready to use. The Model 4100XL offers many features. A few of these features are listed below: NTEP certification for Class III installations to 5,000d.
- Page 4 Quick Start User's Guide 4100XL Front Panel Layout Power Up: Connect scale to a compatible power source. Basic Weighing Operation: 1) Remove all items from the scale platter. 2) Press ZERO to zero the scale. The weight display should now read zero.
- Page 5 Controls and Display Operation: The operational controls for the Model 4100XL consist of the ZERO with optional PRINT and or UNITS buttons. A six digit LED display is used to provide weight indications and operator messages describing scale operation. Scale status such as motion (MOT), polarity (NEG), and center of zero (ZERO) are displayed on annunciators located to the left of the display area.
-
Page 6: Limited Warranty
Under no circumstances will DORAN be responsible for any indirect or consequential damages due to errors in weighing or failure of a DORAN product to perform properly.
Need help?
Do you have a question about the 4100XL and is the answer not in the manual?
Questions and answers