Connecting With The Dynaedge - Toshiba AR100 User's Information Manual

AR100 Viewer

Connecting with the dynaEdge

■ ■ Perform this operation after fixing the AR100 Viewer to the frame.
■ ■ The AR100 Viewer supplies power from the dynaEdge. Please
charge the dynaEdge before connecting.
To connect with the dynaEdge:
1. Plug one end of the USB cable into the USB Type-C™ port of the
AR100 Viewer.
2. Plug the other end of the USB cable into the USB Type-C™ port of the
dynaEdge.
3. Turn on the dynaEdge.
■ ■ Refer to the user's manual of your dynaEdge for the operation on
dynaEdge.
■ ■ To prevent the USB cable from getting in the way while working, it is
recommended attaching it to your collar using the cable clip provided
with some models.
EN-6
Connecting with the dynaEdge
1
2
User Information Guide