Silvercrest KH 2376 Operating Instructions Manual page 55

Initial operation
Initial operation
Face plate
To protect against theft you can remove the face plate from your device. Do not
store the removed face plate in your vehicle.
NOTICE
► When the face plate is not inserted into the frame the theft protection
LED
► To safeguard the face plate always keep it stored in its case.
Installing the face plate
Place the face plate with the left side in the
frame fi rst.
Then fi rmly press the right side until it locks into
place.
Check to make sure that the face plate is fi rmly and
correctely installed in the frame. If the face plate is
incorrectly installed it can result in malfunctions when
operating the device.
Removing the face plate
Press the
Tilt the face plate completely forward.
Slide the face plate to the left and then pull fi rst
the right and then the left side away.
Bluetooth Car Radio KH 2376
on the device blinks.
30
button to unlock the face plate.
10
GB
57