Advertisement
Quick Links
DTM150 ifu_01eng_wk6343.qxd
2006-08-25
21:16
Page 1
English
Mini digital terrestrial receiver
DTM150
User manual
Manuel d'utilisation
Content
Manual del usuario
1
Control elements
5
Manual do usuàrio
and functional
5.1 Favourites lists
components
5.1.1 Creating a favourite list
1.1 What's in the box?
5.1.2 Modifying a favourite list
1.2 Front side (see figure 1)
5.1.3 Delete a favourite list
1.3 Back side (see figure 1)
5.2 Setup
1.4 Remote Control (see
5.2.1 TV configuration
figure 2)
5.2.2 Time setting
2
Safety precautions
5.2.3 Factory setting
3
Connecting other
5.3 New channels
devices
5.4 Installation
4
Operation
5.4.1 Signal information
4.1 Switch-on/ Switch-off
5.4.2 Channels installation
4.2 First-Time installation
5.5 Timers
4.3 Change of channel
5.5.1 Add Timer
4.4 Volume control
5.5.2 Modify timer from the
4.5 Calling up program
information banner
5.5.3 Delete timer from the
4.6 TV/ Radio Switching
4.7 Subtitle
5.5.4 Sleep timer
4.8 Immediate Timer
5.6 User Preferences
4.9 Electronic program
5.6.1 Languages
guide (EPG)
5.6.2 Appearance
4.10 Language
5.6.3 Access control
4.11 Using Teletext
6
4.12 Channel selector
1 Control elements and functional components
1.1 What's in the box?
DVB-T
Remote Control
Antenna
Scart cable
Mini digital terrestrial receiver
DTM150
User manual
Manual del usuario
Manuel d'utilisation
Specifications are subject to change without notice.
User Manual
Trademarks are the property of Koninklijke Philips Electronics N.V.
or their respective owners
1.2 Front side (see figure 1)
2006 © Koninklijke Philips Electronics N.V. All rights reserved.
1 IR sensor
2 Standby LED
Red
Standby mode
Green Running mode
Orange A timer is running
Printed in China
wk6345
3 Standby ON/OFF: Power standby on and off the receiver.
1.3 Back side (see figure 1)
4 Antenna: Receive the digital signal from your antenna.
1
5,6Audio out/ Video out: Connect the cable to your TV or Video
device for video output.
7 DC-in: Connect the provided AC/DC adapter to your receiver.
1.4 Remote Control (see figure 2)
1 INFO
Call up the information banner without changing
the channel.
1
2
3
2 EXIT
Exit a call up window, such as information
banner, menu
3 OK
Confirm a setting
4 Volume + / - Press + / - to increase / decrease the volume bar
for 1 step.
5 Color buttons Color buttons (respectively red, green, yellow
and blue) used in a few sub-menus
6 TV/STB
No function
7 MENU
Call up the SETUP menu
8 TIMER/REC Press TIMER/REC to add a program into the
timer list. Or call up the timer list by pressing
TIMER/REC.
9 ON/OFF
Switch on the box or put it to standby mode
10 Numerical
For numerical input
11 EPG
Call up the Electronic Program Guide
information
12 BACK / P<P During channel selection, press P<P to let user
4
5
6
7
switch between the two last selected channels
13 Arrow
Up/Down/Left/Right navigation
14 Channel + / - Press change up or down
15 Mute
Mute the audio output
16 OPT
the OPT button you can also call up the options
that the TV program is providing
17 TEXT
Teletext
18 LIST/FAV
Allows you to switch between default and
favourite lists
19 APP
the APP button for subtitle selection
20 RADIO
Press RADIO to call up the overview for the
radio channels. You can return to the TV
channel list by pressing RADIO again.
21 I-II
It is for sound selection, such as different audio
2
languages.
2 Safety precautions
Please read the following recommended safety precautions carefully
9
for your safety.
Power source
The Receiver should be operated only from original 9V power
10
adaptor. Please do not open the cover by yourself. There is high
voltage in the set, which will danger your life. Please ask the closest
service for help.
1
11
Power cord
12
The power supply cord should be placed so that it is not likely to
2
be walked on or pinched by items placed upon them or against
13
them. Pay particular attention to cord when you enter the plug,
3
power outlet, and the point where they exit from the Receiver.
Liquids
Keep liquids away from the Receiver. The Receiver shall not be
4
14
exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
15
5
Small objects
16
Coins or other small objects must be kept away from the Receiver
as they can fall through the ventilation slots of the Receiver and
6
17
cause serious damage.
18
Cleaning
7
Disconnect the Receiver from the wall socket before cleaning it.
19
Use a dry cloth lightly dampened (no solvents) to clean the
8
20
exterior of the Receiver.
21
Ventilation
Minimum distance of 10cm, from both sides and a distance of
15cm,to upwards around the apparatus should be kept for
sufficient ventilation. Take care for a good air circulation. The
ventilation should not be impeded by covering the ventilation
openings with items such as newspaper, tablecloths, soft
furnishings, curtains, carpets, etc.
Caution
4.3 Change of channel
· Please do not place the Receiver and the remote control under
You can change the channel in different ways:
direct sun light
By pressing the channel button + or -.
· The Receiver should be placed on a solid and safe base
· The location should not be selected as a room with high
By pressing the Back/ P<P, you switch between the two last
humidity, as the condensation, arising in the kitchen for example,
selected channels.
may cause malfunction or damage the Receiver
Settings
By selecting the channel directly via the channel list, see 4.11
· Heating or other thermal radiation under the Receiver also may
Channel Selector
cause malfunction or damage the Receiver
By entering the number via the numerical buttons. If, for instance,
· Hot air, which arises during the operation, should be ventilated
with sufficient air circulation. Please do not put the Receiver into
the number is 0014, quickly press the numerical buttons 1 and 4
closed areas and do not cover it.
successively. The zeros do not have to be entered.
· Please avoid the contact of the Receiver and of the remote
control with water or humidity. Do not put into operation near
4.4 Volume control
bath, swimming pools.
Use the volume buttons + and – for increasing or decreasing the
· Connect the power supply of the Receiver only after the
volume. A volume bar-graph is displayed to allow you to see
installation is ready.
· The outdoor antenna has to be grounded correctly. For this you
volume level.
have to follow the appropriate regulations.
Mute function
· Take care to provide good air circulation. Place the Receiver in a
By pressing Mute, the sound reproduction is stopped. The sound
location with adequate ventilation to prevent heating up of the
is audible again if you:
Receiver.
· No naked flame sources such as lighted candles should be placed
Press Mute again, or
on the apparatus.
Press one of the volume control buttons.
· Never stack other electronic equipment on top of the Receiver.
4.5 Calling up program information banner
· Remove batteries from the remote control when it is not to be
used for a long period. Otherwise it can be damaged due to any
Press INFO to call up the information banner, a temporized
leakage of batteries.
banner is displayed at the bottom of the screen including:
list
1 The channel list name
3 Connecting other devices
2 The channel number in the current list
list
Connecting DVB-T receiver to a TV set and DVD player.
3 The maturity level
4 The channel name
5 Only information about the present and the following events of
the current service are available. By default, the present event is
displayed. The following event is displayed by pressing 1/2
(toggle between present and following events).
6 Current time
Troubleshooting
7 Duration bar graph
antenna
8 Some specific icons relative to the service properties (from left
to right Teletext presence / channel locked / audio language /
scrambled / DVB-Subtitle presence).
9 Reception quality: the more bars are shown the better the
AC/DC
scart
reception is.
adaptor
cable
1
2
3
To obtain more information on present and following event, you
AC/DC Adapter
could press INFO again.
4.6 TV/ Radio Switching
Mini digital terrestrial receiver
wk6273
Quick start guide
1
Connect
2
Enjoy
In viewing mode, a press on Radio swaps between the current TV
What's in the box
3 Then, select the desired language and follow by TV format
using 1/2. Once, all settings are corrects, validate by
4 Validate the screen to launch the automatic channel
installation. Once the automatic installation is finished, a
pressing OK.
DVB-T
Remote
Control
AC/DC
Adapter
Antenna
then automatically displayed.
temporary pop-up indicates it to you. The first channel is
channel and the current radio channel.
GUIDE
START
QUICK
MANUAL
USER
Scart cable
Quick start
guide
User manual
Program information banner
1
Connect
Press the INFO to call up the information banner:
B
4
5
6
Connecting DVB-T
set.
receiver to a TV
2
1
3
8
7
antenna
3 Maturity level
2 Channel number in the
1 Channel list name
current list
relative to the service
7 Duration bar graph
6 Current time
8 Some specific icons
cable
scart
AC/DC
adaptor
5 Information about the
4 Channel name
events of the current
present and the following
right Teletext presence /
properties (from left to
channel locked / audio
language / scrambled /
4.7 Subtitle
service. Pressing 1/2 to
toggle between present
and following events.
DVB-Subtitle presence).
C
Other settings
menu. This menu allows you to configure the receiver and
From everywhere, a press on the MENU displays the main
2
Enjoy
the TV set. Please refer to User Manual for detail setting.
Need help?
A
First-Time installation
See the user manual that came with your receiver.
Online
User Manual
2 Switch the receiver on by pressing the ON/OFF on the
the signal coverage on website www.p4c.philips.com
area with sufficient DVB-T signal coverage. You can check
1 Before the installation, please make sure you are in an
Go to www.p4c.philips.com
philips
By pressing APP during viewing mode, a pop-up appears to allow
remote control.
RED
LED indication
Standby mode
Blink GREEN
GREEN
Running mode
A timer is running
Quick start guide
you to select the wanted language for subtitles. In this pop-up only
selecting a new one among the list of available languages changes the
language of the subtitles component for the current channel:
A/V cable
(supplied with
portable DVD
player)
4.8 Immediate Timer
You can start a timer immediately on the current TV channel by
pressing the TIMER key.
You are requested to confirm the timer.
4 Operation
The timer stops automatically at the end of the current channel.
4.1 Switch-on/ Switch-off
WARNING During the recording, the Receiver is locked. All
Switch the receiver on by pressing the y (standby button) on the
the remote control keys are inactive, and if present, the LED
remote control and wait until you see the welcome image on your
is blinking,
screen.
You can unlock the Receiver during a recording by pressing
The LED is green if the receiver is switched on.
the TIMER then the 0. The timer is cancelled.
Make sure the A/V input of TV or DVD player is
selected.
4.9 Electronic program guide (EPG)
The EPG offers you an overview of all programmes to be broadcasted
in the next week on the current channel. The information presented
4.2 First-Time installation
for the selected event are: Start time, Title, Short description.
1 Before the installation, please make sure you are in an area with
sufficient DVB-T signal coverage. You can check the signal
· Not all channels offer and extensive EPG.
coverage on website www.philips.com/support.
· Many broadcasting services broadcast the current day
2 After the first switch-on, you'll receive the welcome window.
programme but do not offer detailed descriptions.
The OK always confirms a selection within these menus, and
· There are broadcasting services that do not offer any EPG
pressing it will take you to the next step in the installation process.
information.
However, and this is important, more than one value often has to
be entered in a menu. Firstly, make all necessary setting changes.
1 Select the desired channel
Then, confirm them all simultaneously by pressing OK.
2 Press EPG to call up the electronic programme guide.
You can always return to the previous menu by pressing exit.
The following functions are offered to you by the EPG:
Use the 3/4 to move upwards and downwards from one line
· A press on 3/4allows you to consult all event pages for the
to another.
days, a press on 4 when last event of the list is highlighted
Use the 1/2 to change settings.
displays the next page.
3 On the next screen, select the desired language using 1/2, then
· A press on 1/2 allows you to change to previous/next day of
press 4 to highlight country setting and select your country.
event presentation.
Once, all settings are corrects, validate by pressing OK.
· The Prog (+/-) allows you to change to another channel in
the current channel list.
· By pressing TIMER, you can set a timer on the highlighted
program of the current channel, see 5.5.1 add timer
description.
4 Select your TV format.
4.10 Language
If the current channel has several audio tracks, the I-II button
allows you to choose between them. Selecting a new one amongst
the list of available languages changes the audio language for the
current channel.
5 Validate the screen to launch the automatic channel installation:
Dolby Digital (DD) is not supported.
You can see all TV and Radio channels found as one goes along.
Once the automatic installation is finished, a temporary pop-up
indicates it to you. The first channel is then automatically displayed.
4.11 Using Teletext
1 Press the TEXT button to call up the teletext.
2 Completely hide the teletext by pressing the EXIT or TEXT
button.
You possibly also have to press the OK button in order to
display the teletext and to specify whether you want to use
the teletext of your TV, or that of the receiver.
4.12 Channel selector
The Channel selector is activated by a press on OK while in
viewing mode.
This screen presents the channels of the current default/favourite
lists. When selecting a channel of this list with OK, the Receiver
changes the video background accordingly.
The channel list is automatically removed from the screen after few
seconds.
5 Settings
Press MENU anytime to displays the main menu.
Press 3/4 to highlight the desired option and press OK in order
to call it up.
5.1 Favourites lists
The Favourite lists menu allows you to create, modify and delete your
own favourite lists but not the two default service lists (TV, Radio).
Four TV favourite lists and four radio favourite lists can be created.
5.1.1 Creating a favourite list
This screen allows you to create a new favourite channels list with
selection criteria. The name of the list is set to FAV x for TV
4
5
6
services and RFAV x for Radio.
7
9
8
1 Press MENU to open the main menu.
2 Highlight the Favourites list and press OK.
3 Highlight the Create a favourites list and press OK.
4 Once you have validated the parameters, and press OK to
confirm. The favourite list modification screen is automatically
displayed (see 5.1.2 Modifying a favourite list). By default all
channels are skipped.
5.1.2 Modifying a favourite list
This screen allows you to modify a favourite list. The current
favourite list name is displayed on the top of the screen.
1 Press MENU to open the main menu.
2 Highlight the Favourites list and press OK.
3 Highlight the Modify a favourites list and press OK.
4 In favourites list, you can perform the following function using
the 4 color buttons.
· Add/Skip: press Green button to skip or add the highlighted
channel, in front of the channel list a color icon indicates the
status (white for skipped, blue for added)
· Lock/Unlock: press Red button to lock or unlock the
highlighted channel, in front of the channel list a color icon
indicate the status (red for locked, blue for unlock). The
option is only available if channed is added.
· Sort/Move: accessed by a press on the Yellow button.
Sort can be made by alphabetical or by provider. The
selected services will be sorted and placed at the beginning of
the list, and the other (not selected) will be sorted and placed
a the end of the list.
Move action:
1 Highlight the channel to move
2 Press OK to select it,
3 Move the cursor to the desired location and press OK to
finalize the move operation.
4 Press Exit to go back the favorites list sub menus.
5 Add All/Skip All: press the Blue button to generalize the
Add or Skip operation to all channels.
The only modification you can make in the two default TV and
Radio lists is to lock or unlock a channel.
5.1.3 Delete a favourite list
This screen allows you to delete a favourite list.
1 Press MENU to open the main menu.
2 Highlight the Favourites list and press OK.
3 Highlight the Delete a favourites list and press OK.
4 Highlight the particular FAVx that you want to delete and press
OK to confirm.
5.2 Setup
The Setup menu allows you to configure the Receiver and the TV
set, in particular: the TV set configuration, the time settings and
the reset to default factory settings.
5.2.1 TV configuration
1 Press MENU to open the main menu.
2 Highlight the Setup and press OK.
3 Highlight the TV configuration and press OK.
4 Select the parameters according to below description and press
OK to confirm.
TV Format Depending on the TV format, the format of the video
on the TV SCART is automatically converted to 4:3 or 16:9
according to the received data for each zapping.
TV mode Set your TV system (Pal or SECAM).
TV Audio Signal allows you to set audio to mono or stereo
5.2.2 Time setting
Two modes are available to set the local time:
Automatic one which is based on time received from signal
1 Manual one which allows you to set manually local time
2 Press MENU to open the main menu.
3 Highlight the Setup and press OK.
4 Highlight the Time settings and press OK.
5 Select the mode with 1/2.
6 In manual mode, use digit buttons to set the current date and
time directly.
5.2.3 Factory setting
5.6.3 Access control
You can reset the Receiver to default setting. In doing so, the
The parental control item allows you to enable or disable the
locking management.
individually composed favourites list is deleted.
1 Follow the same step as 5.6 User preference.
1 Press MENU to open the main menu.
2 Highlight the Access control and press OK.
2 Highlight the Setup and press OK.
3 Select the parameters according to your preference:
3 Highlight the Factory settings and press OK. (The Receiver
Parental Control If the parental control item is disabled then
carries out a reboot)
all the locking are deactivated, If it is enabled then all the locking
4 Carry out a First-time installation (see 4.2 First-time
are applied according to your choice.
installation)
Receiver Lock If this item is set to Yes, each time the
Receiver turns to running mode (leaves the standby mode), the
5.3 New channels
PIN code has to be input.
If some new channels have been detected during the standby of the
Setup Menu Lock allows you to protect the menu screen
Receiver, a popup is displayed when the user wake up the
access and all its sub-screens.
Receiver.
Channel Lock allows you to lock a specific service (the PIN
code is requested when you zap to the locked services). To
To see the new channels:
lock / unlock a service, see 5.1.2 modify a favourite list).
1 Press MENU to open the main menu.
Maturity Level A parental rating (between 1 and 18 years) is
2 Highlight New channels and press OK.
available. In this case, all services which are not in the age limits
5.4 Installation
become inaccessible unless enter the PIN code. This parental
rating depends of the information forwarded or not by the
This menu allows you to enter to the Signal information menu,
broadcaster.
to the Channels installation menu.
To enter into Installation menu:
If maturity level access control is activated, all access to timer
1 Press MENU to open the main menu.
feature request the PIN code.
2 Highlight Timers and press OK.
5.4.1 Signal information
4 To change the PIN code, press on red button. The default
Receiver PIN code (after the "First Time Installation" or
This screen allows you to adjust your terrestrial antenna. Two
"Factory System Reinstallation") is "0000".
signal bargraphs are proposed. The first indicates the power of the
5 Enter the new wanted PIN code, enter it a second time in
signal, the second indicates the quality of the signal measured by
Confirm item.
the Bit Error Rate (BER).
1 Follow the same step as 5.4 Installation to the Installation
6 Troubleshooting
menu.
Fault
Possible cause
2 Highlight Signal information and press OK.
3 You can check the quality of different channels by selecting new
Receiver
No main voltage
one with the 1/2 or the digits buttons of the "Channel
does not
start and the
number" item. The corresponding frequency is displayed in
red LED is
kHertz.
not on
Receiver
Obstacle between remote
5.4.2 Channels installation
cannot be
control and Receiver
This screen allows you to install channels with few criteria.
operated
1 Follow the same step as 5.4 Installation to the Installation menu.
Receiver is not switched on
using remote
2 Highlight the Channels installation and press OK.
Batteries are empty
3 Three items are available to configure the channel list:
Installation Type the installation can be a new one (removing all
A timer is running, the
Receiver is locked (all the
current channels installed and all timers previously set) or can be
remote control keys are
an addition to the current installation.
inactive), the font panel LED
Installation Mode the installation can be "standard" (full
is blinking
automatic scanning through the Receiver tuner) or "manual".
No picture,
Your Receiver is in standby
Channel Type a filter could be done on channels to install only
no sound, but
mode
scrambled ones, only free ones or all
the red LED
is on
5.5 Timers
No picture,
The SCART connection to
By means of the timer setting, you can switch your Receiver on and
no sound, but
the TV is faulty or loose
off at a specific time, for instance, in order to allow for the recording
the green
with a video-tape recorder. The receiver then automatically switches
LED is on
on in the standby mode. If the receiver is already switched on, the
No/Week
DVB-T signal is too week,
receiver automatically switches to the selected program.
signal
or out of DVB-T signal
displayed on
covering area.
The timer can be set via the EPG "4.9 EPG" or via the "Timers"
the screen
menu in the following section.
To enter into Timers menu:
1 Press MENU to open the main menu.
2 Highlight Installation > Timers and press OK.
During the recording, the Receiver is locked. All the remote
control keys are inactive, and if present, the LED is blinking,
Channel is no longer
broadcasted
You can unlock the Receiver during a recording by pressing
No Service
Strong interference
TIMER then the 0. The timer is cancelled.
displayed on
If maturity level access control is activated, all access to timer
the screen
feature request the PIN code.
All timers are deleted after a "new" installation.
5.5.1 Add Timer
1 Follow the same step as 5.5 Timers to the Timer menu.
2 Highlight the Add timer and press OK.
3 Input all required parameters using numerical buttons and 1/2.
Improper channel selects
Cross the border
Pay TV service
No service during mobile
application with speed over
50km.
5.5.2 Modify timer from the list
Cannot find
The signal may be weak
This screen allows you to see the list of programmed timers and to
the channels
you think if
modify them.
should be
1 Follow the same step as 5.5 Timers to the Timer menu.
available
2 Highlight the Modify timer from the list and press OK.
Several
These channel are not
3 Highlight the programmed timer and press OK. The same
channels are
broadcasted 24 hours a day
screen as "Add Timer" is displayed except that parameters of
not received
and sometimes are not
highlighted timer are automatically displayed. The behavior is
from time to
available. This does not
the same as described in as "Add Timer".
time
resemble a fault
Cannot
The parental lock has been
5.5.3 Delete timer from the list
access a
activated on this channel
1 Follow the same step as 5.5 Timers to the Timer menu.
particular
and an OSD message
2 Highlight the Delete timer from the list and press OK.
channel, even
prompts you for your PIN
3 Highlight the programmed timer and press OK.
using the
code
number keys
4 A pop-up is displayed to allows you to confirm the deletion.
Forgot the
5.5.4 Sleep timer
PIN code
You can set a sleep timer to turn automatically the Receiver into
standby mode after a while.
1 Follow the same step as 5.5 Timers to the Timer menu.
2 Highlight the Sleep timer and press OK.
3 Select the timer using 1/2. Few values are available: 15min, 30
min, 45min, 1hour, 2hours, 3hours of Off to disable this feature.
5.6 User Preferences
In User preferences, you are able to customize the Receiver. You
can set your preferred languages, modify few visual features,
activate/deactivate some locking and change the PIN code.
To enter into User Preferences menu:
1 Press MENU to open the main menu.
2 Highlight User preferences and press OK.
5.6.1 Languages
I set the
timer but it
1 Follow the same step as 5.6 User preference.
did not
2 Highlight the Languages and press OK.
record what
3 Where you can select the menus language, the audio language
I wanted.
and subtitles language via 1/2, and press OK once you confirm
all the setting.
5.6.2 Appearance
This screen allows you to modify the appearance of information
Each time I
The maturity level access
displayed during the viewing mode.
set a timer,
control is set
1 Follow the same step as 5.6 User preference.
the PIN
2 Highlight Appearance and press OK.
code is
requested
3 Select the parameters according to your preference:
The picture
The broadcast is probably
Banner Timeout allows you to set the duration of the display of
on some
in widescreen and the
banner in viewing mode, available values are from 3 to 10 seconds.
channels
receiver settings may be
Volume bar display allows you to display or not the volume bar
seems to
not correct.
Volume bar timeout allows you to set the duration of the
have been
display of the volume bar, available values are from 3 to 10
stretched or
squashed.
seconds.
Subtitle display allows you to display or not subtitles according
to subtitle language.
Disposal of your old product
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached
to a product, it means the product is covered by the
European Directive 2002/96/EC.
Please be informed about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose of your
old product with your normal household waste. The correct
disposal of your old product will help prevent potential negative
consequences to the environment and human health.
Modifications
Modifications not authorized by the manufacturer may void user
authority to operate this device.
Notice for the European Union
This product complies with the radio interference requirements of
the European Union.
Note
Remedies
Check connector cable
and pluggable power
supply
Eliminate Obstacle
Switch on the Receiver
Change with the new
batteries
Press the TIMER key
and 0 Key successively
to cancel the timer and
unlock the receiver
Press either Prog +/-,
MENU or any number
key to bring your
receiver out of standby
Check the SCART TV
connection
Make sure you are in
an area with sufficient
coverage. You can
check the co verage on
the website
www.philips.com/support
Re-adjust your antenna
position
Carry out automatic
scan mode.
Make sure you are in
an area with sufficient
coverage. You can
check the coverage on
the website
www.philips.com/support
Re-adjust your antenna
or move the receiver
to another location
with less interference
Check the country
setting
Carry out automatic
scan mode.
Please make sure you
are watching non-pay
TV program
Carry out scan mode
again
Enter your parental
code to access the
channel or unlock the
channel
When prompted for
your PIN code, enter
the Master PIN code.
This will allow you to
proceed as well as
reset the PIN code to
the default PIN code
of the receiver
(default is "0000").
The Master PIN code
is "RED RED GREEN
GREEN YELLOW
YELLOW BLUE
BLUE".
Note : keep this code
secret to prevent
your children from
using it.
Make sure the time
of your VCR is set to
the the same time as
your receiver.
Make sure the timer
is still on the list. It
may have been
deleted by a "new"
installation.
Set the maturity level
access control to
None or prefer lock
specific channels.
Check the receiver
"TV format" option
setting, following the
information in 5.2.1
TV configuration. If
you have a
widescreen TV, you
may also need to
check the settings on
your TV.
Advertisement
