Contents 1 Important Safety Recycling 2 Your SDV5120 Overview 3 Get started Installation 4 Set up SDV5120 For VHF/FM reception For UHF reception Set up a digital tuner with this antenna 5 Frequently asked questions 6 Warranty and service 7 Glossary...
2 Your SDV5120 Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Overview 230-240V AC/12V DC power adaptor (included) Gain control knob VHF rod antenna UHF loop antenna...
Connect to the TV One end of the coaxial cable is already connected to the signal output of the antenna. Connect the other end to the input on the TV receiver. Connect the DC plug to the antenna and the power supply to a 230-240V AC outlet. Note •...
Note • It is possible to turn the gain control knob down for best reception. For UHF reception Turn the TV to the desired channel/ station. To turn the amplifier up, rotate the gain control knob towards the max position. Tilt or swivel the UHF loop antenna towards the transmitter until the reception is achieved.
(see ‘Set up a digital tuner with this antenna’ on page 8) 6 Warranty and service Warranty information can be found at: www. philips.com/welcome For technical support, send us an email with the model number of the product and a detailed description of your problem to:accessorysupport@philips.com...
7 Glossary Amplifier A device, either a single stage or a large scale circuit with multiple stages for creating gain, i.e. it makes small signals larger. Antenna A device, such as a rod or wire, which picks up a received radio frequency signal or radiates a transmitted RF signal.