Setting Up A Configuration Environment - H3C S9500E Series Connecting Manual

Table 1 Console cable pinouts
RJ-45 pin
1
2
3
4
5
6
7
8
Figure 2 Connecting the switch and the PC through the console port
To connect the console cable:
Connect the DB-9 connector of the console cable to the serial port of a PC or terminal.
1.
Connect the RJ-45 connector of the console cable to the console port of the MPU of the switch.
2.
NOTE:
When you remove the console cable, first unplug the RJ-45 end, and then the DB-9 end.

Setting up a configuration environment

Select Start > All Programs > Accessories > Communications > HyperTerminal.
1.
The Connection Description dialog box appears.
Enter the name of the new connection in the Name field and click OK.
2.
Signal
RTS
DTR
TXD
CD
GND
RXD
DSR
CTS
2
DB-9 pin
8
6
2
5
5
3
4
7
Signal
CTS
DSR
RXD
SG
SG
TXD
DTR
RTS