Page 1
BT013 Redleg 3 7’x7’x52’’(H) IMPORTANT We strongly suggest setting up your new tent before going camping to insure that all parts are present and to familiarize yourself with the tents assembly. This will have a great effect on how well you enjoy your camping trip.
Frame Parts Fly Pole (X 1) Main Pole (X 2) Step 1- TENT SET UP (To prolong the life of your floor we suggest the use of a ground cloth cut slightly smaller than the floor of your tent and that you select a campsite that is level and free of rocks and roots.) Spread the tent body out on the ground.
Page 3
Step 2- ATTACHING the RAIN FLY Slightly bend the pole into the webbing pocket on the opposite end of the fly (Figure E) Tie the cords attached to the center of the rainfly around the middle of the 2 fly poles (Figure F) Drape the fly over the tent and line up ends with the shockcord loops with the main tent poles and attach the hooks to the rings in the corners...
Model BT013 Frame Parts Fiberglass Poles Fly Pole Main Pole Misc. Parts Tent Body Rain Fly Tent Bag Pole Bag Stake Bag Fly Bungee w/ hook Pin & Ring Guylines...
Page 5
To insure that this does not occur take care during windy or rainy conditions that all of Gigatent suggests that at a MINIMUM the seams the stakes and guylines are secure and tight. at the bottom of the windows should be sealed...
Page 6
Thank you for purchasing a quality product from GIGATENT. This troubleshooting guide is designed to help you sort out some of the possible problems you might encounter with your new tent. If you are still having problems with your purchase please contact us at 973-709-1111 or email us at info@gigatent.com...
Need help?
Do you have a question about the Redleg 3 and is the answer not in the manual?
Questions and answers