Table of Contents
Advertisement
Setting up the PC
For this section, refer to the instructions supplied by the
manufacturer of the WLAN USB key to help you to find
and join the "house" network.
1 You may need to install the software for the WLAN
USB key on the PC, if this has not already been
done.
2 Plug WLAN USB key into a USB port on the PC.
3 Use the software of the WLAN USB key to detect
the network.
4 Join the network "house" once this has been
detected.
5 Now set up the WLAN network connection of your
PC.
To guide you through this stage, refer
to the paragraph "Setting the
Note
parameters for a connection" in the
manufacturer's instructions.
To do this, you must configure the element
Protocol Internet (TCP/IP) for the WLAN
connection that has been created. If this element is
set up in such a way as to obtain an IP address
automatically, you must change it to manual mode
to set up the TCP/IP address ("169.254.0.1" in our
example), the subnet mask ("255.255.0.0" in our
example) and the default gateway ("0.0.0.0" in our
example).
6 Enter OK.
SNMP service configuration
A Simple Network Management Protocol (SNMP) agent is
available on the multifunction machine for network
administrators who want to monitor and manage the
device via the local network using their SNMP network
service.
Compatible with standard SNMPv1
Note
and SNMPv2 IP networks.
SNMP agent configuration
To configure the parameters of the SNMP agent on the
multifunction machine:
1 Open a Web browser using a PC that is registered
on the network.
2 Enter the IP address of the machine in the Address
field and confirm by pressing Enter.
3 When the homepage opens, select the interface
language.
4 In N
, select SNMP.
ETWORKS
5 In C
, enter the required write and read
OMMUNITY
shared community name that allows
communications between SNMP agents
(multifunction machine) and SNMP management
stations (PC with console).
6 In T
, select the information and events to
RAP
collect.
7 In T
R
RAP
ECIPIENT
where the SNMP browser is installed.
8 Confirm your modifications.
SNMP browser configuration
The multifunction machine comes with the following
embedded Management Information Base (MIBs):
•
Common Printer
•
Host Printer
•
Printer Port Monitor
The following traps (collectable information) are available:
•
Date
•
Memory status (type, used and max. size)
•
Devices type (keyboard, scanner, etc.)
•
General status
•
Default language
•
Available languages
•
Printer type (internal/external)
•
LCD specification (line and character number)
•
Serial number
•
Covers type
•
Paper tray (output, input, paper format, capacity)
•
Resolution (600 dpi)
•
Margin size
•
PDL interpreter (type, version)
•
Alerts (paper jam, cover, etc.)
- 53 -
LFF6080
, enter the IP address of the PC
Advertisement
Table of Contents
