Register your product and get support at Philips Presenter SNP3000 www.philips.com/welcome EN User manual...
LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT Wavelength : 645 - 660nm Maximum Power < 1mW IEC 60825-1:1993 + A1:1997 + A2:2001 EN 60825-1:1994 + A2:2001 + A1:2002...
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
Push the slide selector to the ON position. Close the battery compartment. When battery is installed • To switch on the Presenter, push the USB receiver into the Presenter and then remove the USB receiver from it. • To switch off the Presenter, push the USB receiver to the end. Auto-connect Ensure that your notebook is switched on and active.
No transmission. Light on your Presenter blinks 3 times. Light on your Presenter does not blink. Ensure that you use the Presenter within effective range. Replace battery on the Presenter. E n s u r e t h a t t h e P r e s e n t e r i s switched on.