Turn On; Play; Play From Ipod/Iphone - Philips DS6200/10 User Manual

Turn on

In standby mode, there are two ways to turn on
the unit.
• Audio signal detected from the 30-pin
connector or from the AUX-IN port .
» The ring tone is also recognized as
audio signal.
• Press the SYNC button on the top of the
active unit.
» Turn on the unit by pressing SYNC
button will bring the unit into sync
mode.
Note
•
There is no power key on the unit. It turned on
automatically when it detects an audio input.
Switch to standby mode
The unit switches to standby mode in the
following situations.
• In DOCK mode: no audio signal from
docked iPod/iPhone over 15 minutes.
In MP3 link mode: no audio device
•
connected over 15 minutes.
In SYNC mode: press SYNC button for
•
over 5 seconds.
» The power indicator turns off.

4 Play

Play from iPod/iPhone

You can enjoy audio from iPod/iPhone through
this unit.
Compatible iPod/iPhone
The unit supports the following iPod/iPhone
models.
Made for.
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod classic
• iPod nano (2nd, 3rd, 4th, 5th, and 6th
generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
Load the iPod/iPhone
• Insert your iPod/iPhone into the dock.
Remove the iPod/iPhone
• Pull the iPod/iPhone out of the dock.
EN
6