Philips 42FD9954/17 User Manual page 4

Computer Display modes
Operation
R6 / AA
B
4 4
VGA 640x480
Wide VGA 848x480
Wide VGA 852x480
MAC 640x480
MAC 832x624
MAC 1024x768
MAC 1152x870
SVGA 800x600
XGA 1024x768
SXGA 1280x1024
When a VGA computer is connected, the display selection is made
automatically.
A message is displayed when the monitor does not support the connected
VGA mode. Switch your computer to a correct display mode.
&
Insert the mains plug supplied into the mains inlet at the back of the
monitor and in the wall socket. For safety, please, only use the supplied rim-
earthed mains cord which has to be inserted in a grounded socket.
é
Remote control: remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type LR6/AA-1.5V).
The batteries supplied do not contain the heavy metals mercury and cadmium.
Nevertheless in many countries batteries may not be disposed of with your
household waste. Please check on how to dispose of batteries according to local
regulations.
"
Make sure that your receiver box and/or PC are switched on and that your
PC is in the correct display mode.
'
Switch the monitor on : Press the power key B at the right side of the
monitor.
A green indicator lights up and the screen comes on.
When the monitor does not receive a supported VGA signal and is not
connected to a receiver box, the screen switches to standby and the red
indicator lights up.
When you switch on your monitor for the first time, and the monitor is
not connected to an electronic receiver box, the language menu
automatically appears on the screen.The explanation appears in different
languages one at a time.
Follow the instructions on screen to select the correct language or see
Setup menu, Language, p. 8.
60, 72, 75, 85 Hz
60 Hz
60 Hz
66.67 Hz
74.55 Hz
74.93 Hz
75 Hz
56, 60, 72, 75, 85 Hz
60, 70, 75, 85 Hz
60 Hz,
72 Hz (not with DVI-D source)