INSTALLATION INSTRUCTIONS Package Contents VOLT Floodlight with Motion Sensor ® VFL-40XX-MS-ABZ A. (1) Fixture Body Important: Please Read Before Installation Products Model # This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and...
Page 3
INSTALLATION INSTRUCTIONS Place Marks for Wall Anchor Bolts VOLT Floodlight with Motion Sensor ® VFL-40XX-MS-ABZ Hold the yoke mount to your desired mounting surface. Product Dimensions Place a mark on the wall using Wall the holes of the mount. These marks will be used for the wall 2.55”...
INSTALLATION INSTRUCTIONS Adjust Fixture and IR Sensor VOLT Floodlight with Motion Sensor ® VFL-40XX-MS-ABZ Adjust the fixture to your desired Wall Wrench orientation and tighten set screws Install Fixture with a wrench. Adjust the IR sensor to proper Remove the hex nuts and the Set Screw orientation.
Page 5
INSTALLATION INSTRUCTIONS Replace IR Sensor VOLT Floodlight with Motion Sensor ® VFL-40XX-MS-ABZ Remove Backing with IR Sensor Rotate the bracket so that Infrared (IR) Sensor (Continued) the backing can easily be Detection distance: max. 39.4 feet removed from the fixture.
Page 6
INSTALLATION INSTRUCTIONS Make Connections of IR Sensor Wires VOLT Floodlight with Motion Sensor ® VFL-40XX-MS-ABZ Carefully tuck all the wires inside of the back housing. Place the backing with the Make Connections of IR Sensor Wires IR sensor back onto the...
Need help?
Do you have a question about the VFL-40 MS-ABZ Series and is the answer not in the manual?
Questions and answers