Connect To A Wireless Display - HP Elite x3 Manual

Hide thumbs Also See for Elite x3:

Table of Contents

Connect to a wireless display

To wirelessly connect the device to an external monitor, customers should follow these steps.

1. From the All apps menu, scroll down to Continuum, and tap it to launch the app.

2. The Continuum app launches. A welcome screen appears if this is the first time you have used the app.

Tap Set up, at the bottom of the screen, to proceed.

3. The How will you connect? screen appears. To set up a wireless connection, select Wireless adapter.

4. Tap Connect.

5. Any wireless devices that are detected within range display on the screen. Select your display, dock, or

adapter from the selection.

6. The device should automatically connect to the display after you select it from the list.

7. After the HP Elite x3 has connected to the monitor, the Continuum set up sequence begins.

If the customer does not see their wireless external display on the screen, they should check that the

peripheral device is

set to discoverable, if applicable

within range of the HP Elite x3

connected to a power source, if applicable

Table of Contents