Philips DECT5154S/07 User Manual page 37

To remotely control your answer machine
To remotely access your answer machine :
- from another phone dial home
- if your answer machine is on, during or after the message press the star
your answer machine is off, you will hear a beep after 45 seconds, then press the star
- dial your remote control code (the default code is the registration code RC)
- if you have new messages they will be automatically played.
The following table indicates the features available when remotely accessing the answer machine.
Record memo
Play previous message
Play message
Play next message
Listen again
To change the remote control code
The default code is the registration code.We advise you to personalize it.
Press to enter the carousel menu
Scroll to Answer machine and select
Scroll to Answphone settings and select
Scroll to Remote control and select
Scroll to Change code and select
Delete the default code, enter your new remote control code and
press
36
http://www.philips.com/faqs/dect
dial
0
dial
1
dial
2
dial
3
dial
5
OK
Delete
Activate answer machine
Stop
Deactivate
Answer machine
key on the handset ; if
key
dial
6
dial
7
dial
8
dial
9