How To Unregister A Handset; How To Change The Master Pin; How To Reset To Default Settings - Philips CD6402B/79 User Manual

Press on the handset to access the main
1
menu
Scroll / to select Advanced Set
2
Press and
3
Registration
Press and
4
desired base station
Note
The registered base station is marked with an
asterisk at the rightmost of the display.
Press and enter the 4-digit master PIN
5
when prompted (default master PIN is 0000)
Press on the base station for more
6
than three seconds until you hear a beep
tone. Now the base station is ready to
register the new handset.
Press on the handset to validate the
7
PIN code.
"WAITING --" is displayed on the screen
8
• A beep tone is emitted from the handset to
indicate successful registration and the screen
returns to idle mode.
Note
If the base is found and the PIN is correct, the
unused handset numbers will be assigned
automatically.
If the PIN is incorrect, Wrong PIN! will be
displayed with an error tone, and the handset
returns to idle mode.
If no base is found within a certain period, No
Base found! would be displayed with an error
tone, and the handset returns to idle mode.
5.8.7

How to unregister a handset

Press to access the main menu
1
Press / to select Advanced Set
2
Press and
3
Press to enter the 4-digit master PIN
4
when prompted (default master PIN is 0000)
Press and
5
desired handset
Press to confirm
6
• A beep tone is emitted from the handset to
indicate the handset unregistration is successful
and the screen shows Unregistered and back
to idle screen.
Use more of your phone
/ to select
/ to select your
/ to select Unregister
/ to select your
Note
If there are no key presses within 15 seconds,
the unregistration procedure will be aborted
and the handset will return to idle mode.
5.8.8

How to change the master PIN

The Master PIN is used for setting call barring,
resetting your handset and for
registration/deregistration of handsets.The
default PIN is 0000.The length of the PIN is
four digits.This PIN is also used to protect the
settings of your handset.Your handset will
prompt you whenever the PIN is required.
Press to access the main menu
1
Press / to select Advanced Set
2
Press and
3
Press to enter the 4-digit master PIN
4
when prompted
Press to enter the new 4-digit PIN
5
Press to enter the new 4-digit PIN again
6
for reconfirmation
Press to save the settings
7
Note
The default product PIN code is preset to 0000.
If you change this PIN code, keep the PIN
details in a safe place where you have easy
access to them. Do not lose the PIN code.
5.8.9

How to reset to default settings

You can reset your phone to the default settings
(see Section 5.12).After a reset, all your personal
settings and call log entries will be deleted, but
your phonebook remains unchanged.
Press to access the main menu
1
Press / to select Advanced Set
2
Press and
3
Press to enter the 4-digit master PIN
4
when prompted (default master PIN is 0000)
Press confirm
5
Press to reconfirm
6
• A beep tone is emitted and the screen returns
to welcome screen. Your phone is reset to its
default settings.
• Some of the countries may not have welcome
screen and your phone will return to idle screen
after reset.
/ to select Change PIN
/ to select Reset
25