Set Alarm Tone; Personal Settings; Change The Handset Name; Handset Tones - Philips SE6551B/37 User Manual

• A validation tone is emitted and
the screen returns to the Alarm
menu. And the alarm icon
displayed.
• If you select Off, a validation
tone is emitted and the screen
returns to the Clock & Alarm
menu.
Note
The alarm tone and alarm icon will
sound/blink for 1 minute when the alarm
time is reached. To mute the alarm tone,
simply press any key on the handset.

8.12.4 Set Alarm Tone

Press m in idle mode, scroll n to
Clock & Alarm, and press o
Select.
Scroll n to Alarm Tone and press
o Select.
Scroll n to select the tone. (Three
tones are available. The tones sound
as you scroll.) Press o Select to
confirm your selection.
• A validation tone is emitted and
the screen returns to the Clock
& Alarm menu.
9

Personal settings

9.1

Change the Handset Name

You can name the handset and display the
handset name in idle mode. The default
handset name of your handset is Philips.
44
Press m in idle mode, scroll n to
Personal Set and press o
is Select.
Handset Name is highlighted;
press o Select.
The last stored name is displayed.
Press c Clear to delete the
characters one by one or a long
press to delete all.
Enter the new name and press o
OK to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
9.2

Handset Tones

9.2.1 Set the Ring Volume

Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
In multihandset packs, you can set the
ring volume independently on each
registered handset. There are 5 ringer
volume levels plus progressive and off.
The default is level 3.
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Handset Tones and
press o Select. Ring Volume is
highlighted; press o Select.
Personal settings