Philips CD4453S/05 Quick Start Manual

Set the earpiece volume
During a call:
Press / to select the eapiece volume from level one to level five
Set the ring melody
1. Press to access the main menu
2. Press / to select PERSONAL SET
3. Press to select HANDSET TONE
4. Press and / to select RING MELODY
5. Press and / to scroll to your desired ring melody
6. Press to save the settings
Store a number in the phonebook
1. Press to access the main menu
2. Press / to select PHONEBOOK
3. Press and / to scroll to NEW ENTRY
4. Press to enter the name (maximum 12 characters)
5. Press to enter the number (maximum 24 digits)
6. Press to choose a group (<No Group>, <Group A>, <Group B>,
<Group C>)
7. Press to save the entry
Access the phonebook
1. Press to access the phonebook
2. Press / to select your desired phonebook entry
3. Press to view the details of your selected phonebook entry
Listen to new messages recorded on answering machine (applicable to
CD445 only)
1. Press on the base station to turn on the answering machine
2. Press on the base station, playback of the oldest new message will begin.
3. Press to skip the current message and play the next message
4. Press to go back to previous message if it is pressed within one second of
current message playback
5. Press to replay current message if it is pressed after one second of current
message playback
6. Press to increase or to decrease speaker volume during message
playback
7. Press to delete the current message
See CD445 user manual for details about the answering machine function.
Troubleshooting
For more information, see the user manual that came with your CD440 or
CD445.
Problem Solution
No dialing tone Charge the batteries for at least 24 hours
•
Move closer to the base station
•
Use the line cable provided
•
Poor audio quality • Move closer to the base station
Move the base station at least one metre
•
away from any electrical appliances
The is blinking Register the handset to the base station
•
Move closer to the base station
•
The handset LCD displays • Try again by disconnecting and connecting the
nothing base station power supply and follow the
procedure to register a handset
Make sure the two supplied rechargeable
•
batteries have been inserted into the battery
compartment
Make sure the supplied batteries are charged
•
up
Caller Line Identification Check your subscription with your network
•
(CLI) service does not work operator

Need help?

User Manual
See the User Manual that came with your CD440 or CD445.
Online help
www.philips.com/support
Welcome
Quick start guide
1
Connect
2
Install
3
Enjoy