Table of Contents
Advertisement
4
Press
.
OK
• The handset displays the time
editing screen.
5
Use digit keys to enter the time.
Press the right softkey
select
or
AM
6
Press
.
OK
• The setting is saved.
3.7
What is standby mode?
Your phone is in standby mode when it is
idle. The standby screen displays the handset
name, the handset number, the signal icon,
and the battery icon.
Note
When the phone is idle for a few seconds,
the backlight of your phone will go off. If the
phone is left idle for the next 20 seconds, it
will switch to
SCREENSAVER
displaying the time in digital clock format.
3.8
Checking the signal strength
The signal icon
between your handset and the base
station. A steady icon means your
handset and the base station are linked. A
flashing icon means your handset and the
base station are not linked.
If you move too far away from the base
station while you are on the phone, you
will hear warning tones notifying you that
your handset is almost out of range - lost
link. Take your handset closer to the base
station or your call may be cut off shortly
after the warning.
Getting started
(
.
PM
mode
displays the link status
Note
If your handset has lost link, you will not
be able to make or receive any calls. You
will also not be able to carry out many of
to
the phone's functions and features.
3.9
Missing handset(s)
1
Press
• All the handsets connected to this
base station ring.
2
Press
to stop paging.
• All the handsets stop ringing
OR
Press any key on the handset to stop
the paging for all handsets (except if
you press
paging for that handset).
_
on the base station.
_
on the base station again
, it will only stop
SILENT
15
Advertisement
Table of Contents
