How To Preset Timer For Cooking - Cuckoo Fuzzy Series Operating Instructions Manual

How to preset timer for cooking

How to use timer function
1 1 1 1
Check if the current time and the menu are correct.
▶ Refer to page 14 for the time setting.
▶ If the current time is not set correctly, the presetting time will also be
incorrect.
▶ Make sure to select AM or PM correctly.
2 2 2 2
Turn the Lock/Unlock handle to the lock
position and a lock icon will be displayed on the
screen. Then press the "preset" button.
▶ To activate Preset 1, press the "preset" button once. To activate
Preset 2, press the "preset/timer" button twice.
▶ Factory Set Configurations-Preset 1 : Preset at 6:30 am, Preset 2
: Preset at 7:00pm. If you want to use these times, select Preset
1 or Preset 2
▶ If the lock/unlock handle is not in the locked position then you will
not be able to program or use the preset function
▶ When you press the "preset" button, the preset time will be
displayed, and the Preset 1 & Preset 2 signs will be blinking.
▶ Gaba menu, you have to select "
timer function.
※ When it is in keep warm mode, press cancel to exit keep warm
mode, then select your desired preset time.
3 3 3 3
Select menu with "Menu/Selection" button.
4 4 4 4
Preset the time.
▶ In case of setting up timer while warming, increases by 10min
when you press "
▶ Please set up timer after canceling warming, decreases by 10min
when you press "
If you keep on pressing either button, It can be changed continually.
※ Please be careful no to change frome AM to PM.
▶ Then press the "Set" button to program your desired time.
5 5 5 5
Press "Pressure Cook"button.
▶ It says that preset cook for glutinous is booked Preset cook will be
completed at the timer
▶ Once cook is completed with preset time, preset time is stored in the
memory.
▶ Don't need to set up time again.
※ If a small amount of rice is cooked, it could be finished earlier than
time you programmed it.
28
HOW TO PRESET TIMER FOR COOKING
" in order to use the preset
"button
" button