Table of Contents
Advertisement
6.1.6
ISO
This device was designed and manufactured using a certified ISO (International Orga-
nization for Standardization) quality program that adheres to the following standard:
•
6.1.7
ACMA
This device meets the requirements of the following Australian Communications and
Media Authority (ACMA) standards under certificate ABN 98 004 347 880:
•
•
•
•
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online Sup-
port at
6.1.8
RoHS
This device is declared by Siemens AG to meet the requirements of the following Ro-
HS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
try.siemens.com/cs/ww/en/view/109738831.
RUGGEDCOM RSG2100P
Installation Manual, 01/2020, C79000-G8976-1041-16
ISO 9001:2015
Quality management systems – Requirements
Radiocommunications (Compliance Labelling – Devices) Notice 2014 made un-
der Section 182 of the Radiocommunications Act 1992
Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008
made under Section 182 of the Radiocommunications Act 1992
Radiocommunications (Compliance Labelling – Electromagnetic Radiation) No-
tice 2003 made under Section 182 of the Radiocommunications Act 1992
Telecommunications Labelling (Customer Equipment and Customer Cabling) No-
tice 2001 made under Section 407 of the Telecommunication Act 1997
https://support.industry.siemens.com/cs/ww/en/view/89855782
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Informa-
tion Products
Certification
6.1.6 ISO
.
https://support.indus-
43
Advertisement
Table of Contents
