English - Philips HR7600/10 Recipes & Directions For Use

ENGLISH

6
Food processor: parts and accessories
A) Speed control
B) Motor unit
C) Motor lock (The motor unit can be released
by pressing the two release buttons.The
motor unit will only function if it has been
properly assembled).
D) Pusher
E) Feed tube
F) Lid with bayonet lock
G) Tool holder
H) Bowl
I) Blade + protective cover
J) Suction cap
K) Emulsifying disc
L) Insert holder
M) Slicing insert medium
N) Shredding insert medium
O) Spatula
Introduction
This appliance is equipped with an automatic
thermal cut-out system.This system will
automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops
running:
1 Pull the mains plug out of the socket.
2 Set the speed control to '0'.
3 Let the appliance cool down for 60
minutes.Then the appliance is ready for
use again.
4 Put the mains plug back into the socket.
5 Switch the appliance on again.
Please contact your Philips dealer or an
authorised Philips service centre if the automatic
thermal cut-out system is activated too often.
CAUTION: In order to avoid a hazardous
situation, this appliance must never be connected
to a timer switch.
Important
Read the instructions for use carefully and
look at the illustrations before using the
appliance.
Keep these instructions for use for future
reference.
Check if the voltage indicated on the
appliance corresponds to the local mains
voltage (110-127V or 220-230V) before you
connect the appliance.
Never use any accessories or parts from
other manufacturers or that have not been
specifically advised by Philips.Your guarantee
will become invalid if such accessories or
parts have been used.
Do not use the appliance if the mains cord,
the plug or other parts are damaged.