Installing and connecting
2.3 Safety instructions for connection
2.3
Safety instructions for connection
Safety information
Note
When laying cables and wiring, make sure that you adhere to the installation regulations in
accordance with EN 60079-14 and any regulations specific to your country.
Explosion hazard
Sparks may occur when connecting in some circumstances.
Therefore, use a non-magnetic screwdriver when connecting the cables.
Explosion hazard
A tensile load on the screws of the AFD4, AFD4 (FM), AFD8 and AFS can impair the
degree of protection and is not permitted.
Implement a fixed Installation for inlet of the cable!
Schematic representation of the interior
Figure 2-2
14
DANGER
DANGER
Schematic representation of the interior (AFD4)
Active field distributors AFD4, AFD4 (FM), AFD8 and AFS
Product Information, 02/2015, A5E03775304-AC