Philips HR1358/54 User Manual page 3

11. Any service of the Hand Blender should be per-
formed by the retail location where it was purchased.
12. To disconnect, release the power "On/Off" button,
then remove plug from electrical outlet. Remove plug
by gripping the plug body and pulling it from the outlet.
Never yank or twist the cord to unplug. Make sure the
motor and blades completely stop turning before
putting on or taking off parts.
13. During operation keep hands, hair, and clothing, as
well as spatulas and other utensils away from attach-
ments, blades and any mixing containers to prevent the
possibility of severe injury to persons and/or damage
to the Hand Blender. If scraping, folding, etc., is neces-
sary, Hand Blender must be turned off, by releasing the
power On/Off button and unplugged, and only use a
rubber spatula.
14. Never leave the appliance unattended.
15. Blades are sharp. Handle carefully and with caution
when removing, inserting or cleaning.
16. When mixing liquids, especially hot liquids, use a tall
container or make small quantities at a time, to avoid
splattering and burning. Always begin processing
at the lowest speed setting.
17. To avoid any injury, never place cutting blade on
base without first putting chopper bowl properly in
place.
18. Be certain chopper lid is securely locked in place before
operating chopper. Do not attempt to remove lid until
blade has stopped rotating completely.
19. When using mixing bowl, beaker or chopper, check for
presence of foreign objects before using. Always make
sure that rubber sealing ring is in the correct position on
chopper unit before using. The blender base/motor unit
is intended for use only with attachments provided. Do
not substitute with any other attachments.