Advertisement
ENGLISH
6
Introduction
The appliance has been equipped with an automatic thermal cut-off
system.This system will automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops running:
1
Pull the mains plug out of the wall socket.
2
Set the selector knob to position 0 to switch the aplliance off.
3
Let the appliance cool down for 60 minutes.
4
Put the mains plug in the wall socket.
5
Switch the appliance on again.
Please contact your Philips dealer or authorised Philips service centre if
the automatic thermal cut-off system is activaed too often.
CAUTION: In order to avoid a hazardous situation, this appliance must
never be connected to a timer switch.
The appliance has been equipped with a built-in safety lock that
prevents it from functioning if the accessories have been assembled
incorrectly or have not been assembled at all.
Never use the accessories to turn the appliance on and off!
Important
Please read these instructions carefully and look at the illustrations
before using the appliance.
Keep these instructions for further reference.
This appliance is intended for household use only.
Check if the voltage indicated on the appliance corresponds to the
local mains voltage (110 - 127V or 220 - 240V) before you connect
the appliance to the wall socket.
Never use any accessories or parts from other manufactures or
which have not been specifically advised by Philips.Your guarantee
will become invalid if such accessories or parts have been used.
If the mains cord of this appliance is damaged, it must always be
replaced by Philips or a service centre authorised by Philips, as
special tools and/or parts are required.
Do not use the appliance when the mains cord, the plug or other
components are damaged.
Assemble the appliance properly before plugging it into the wall
socket.
When the jar unit or other accessories are properly fixed on the
motor unit, you can hear the 'click' sound.
Advertisement
