abi 3H Setup Manual page 9

OPERATION:
Unpacking & Set-up -
5.
Grab the ratcheting turn knuckle
and meet up with the connecting
tab welded to the hitch harness.
Use the hitch pin you removed
from the connecting tab to pin the
turn knuckle and connecting tab
together. Be sure to use the
provided safety lynch pin to lock
hitch pin in place.
6.
Remove locking pin from the
crank jack and pivot position to be
parellel with the ground. Then
reset the locking pin.
7.
This next step REQUIRES two
strong individuals to complete.
With two strong individuals grab
the hitch harness and use it as
leverage to pull the spreader onto
it's wheels.
8.
Now your Elite Hydraulic Spreader is ready to connect to your tow
vehicle. See sections below for information on hooking up the hydraulic
system and attaching to a tow vehicle.
ABI
(Absolute Innovations, Inc.)
Elite Hydraulic Spreader Setup Guide
855-211-0598
-
- www.abisupport.com
Page | 9