Overview Of The Components And Ports - Siemens SIMATIC Series Manual

7.2

Overview of the Components and Ports

Component/Port
Chipset Intel 845GE
BIOS Update via software
CPU Pentium 4 / Celeron
(type mPGA478)
Memory DIMM modules
Graphics AGP slot
*3
Hard disk Master or slave on primary EIDE port
ATA 33/66/100 mode
CDROM/ Master or slave on secondary EIDE port
*3
CD R/RW
*3
Floppy Port for 34-pin ribbon cable
Keyboard Port for PS2 keyboard
Mouse PS2 mouse port
Serial/COM1 Serial interfaces for devices such as a
Serial/COM2 modem, a mouse, a printer
COM2 (optional)
Parallel LPT, Standard, bidirectional, EPP and
ECP mode
USB Universal Serial Bus
Ethernet 10BaseT/100Base-TX (Intel Kinnereth,
DA82562ET)
1
*
Electrically isolated in a safety extra-low voltage circuit (SELV)
2
* Depending on the CPU type
3
* Depending on the selected device configuration
SIMATIC Rack PC IL 40 SManual
A5E00200171-01
Description
Hardware Information
Parameters
•
CPUs with 533 / 400 MHz PSB,
SDRAM DDR 333/266 unbuffered,
without ECC
•
Upgradeable
•
Data capacity of 64 bits
•
2.5 V
•
SDRAM to PC2700/2100
specification
•
333/266 MHz bus speed
•
2 DIMMs can be used
•
easy to exchange
•
variable from 128MB to 2 GB
•
AGP slot supports 1x/2x/4x modes
•
Ultra DMA capable
•
48 speed (CD ROM) or
48x24x8 (CD R/RW)
DMA capable
•
1.44 MB
•
Standard
•
Standard
•
Standard 9-pin D subminiature (pin)
•
Standard
•
25 pin subminiature Cannon
connector
•
four high current (500mA) USB ports
•
10/100 Mbps, potentially isolated *
*3
1
7-3