Configuration Of Ip Ports - Panasonic KX-TDA30 Manual

Ip proprietary telephones hybrid ip-pbx
Hide thumbs Also See for KX-TDA30:
Table of Contents

Advertisement

4.4 Configuration of IP Ports

4.4 Configuration of IP Ports
A KX-NT300 series IP-PT user or KX-NT265 IP-PT (software version 2.00 or later) user can configure the port
number of PTAP, DHCP, and FTP ports. Consult your network administrator to check whether the configuration
of the IP ports is required.
Follow the procedure below to configure the port number of the IP ports.
KX-NT300 series (except KX-NT321)
To start programming
SETUP
Press "SETUP"
when it is displayed.
To configure the port number of PTAP Ports
Select "PTAP Server Port".
Port No.
1024 – 65535
To configure the port number of PTAP Ports for the Secondary PBX (optional for
software version 2.00 or later only)
Select "PTAP Server Port".
Port No.
1024 – 65535
Select "PTAP Client Port".
To configure the port number of DHCP Ports
Select "DHCP Server Port".
Select "DHCP Client Port".
Continued on next page
52
Information about IP Proprietary Telephones
Select "IP Port".
ENTER
Software version 2.00 or later only
ENTER
Select "Primary PBX".
ENTER
ENTER
Select "Secondary PBX".
ENTER
ENTER
ENTER
ENTER
Password
7678
ENTER
ENTER
Port No.
1024 – 65535
Port No.
67, 1024 – 65535
Port No.
68, 1024 – 65535
ENTER
ENTER
ENTER
ENTER

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200Kx-tda600Kx-tda100

Table of Contents