Related Manuals for MultiTable Mod-E Pro
Summary of Contents for MultiTable Mod-E Pro
- Page 1 The Height of Healthy Design ® MultiTable Mod-E Pro Electric Standing Desk ASSEMBLY INSTRUCTIONS...
-
Page 2: Table Of Contents
PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly procedures. Check that all the parts shown below were provided with your order. Contact MultiTable if any materials are missing. Do not discard the packaging until the product meets your satisfaction. -
Page 3: M6X18
ASSEMBLY MultiTable Mod-E Pro Electric Standing Desk Frame STEP 1 With the table top facing down on a soft, clean surface, arrange the leg columns, top supports, and cross channels, as shown. • Positioning does not need to be exact at this time. -
Page 4: Top Supports
MultiTable Mod-E Pro Electric Standing Desk Frame ASSEMBLY STEP 3 • Use the 5mm Allen key to loosen the 8 set screws on the under side of the cross channels. • Position the leg columns and top supports so that the top supports are aligned over the pre-drilled holes. - Page 5 ASSEMBLY MultiTable Mod-E Pro Electric Standing Desk Frame M6x15 Rear • Place the square opening on the foot over the leg. • Use the 5mm Allen key and M6x15 socket head bolts (with flat tip) to secure the feet in position.
-
Page 6: U-Bracket
MultiTable Mod-E Pro Electric Standing Desk Frame ASSEMBLY STEP 8 Use the 5mm Allen key to tighten the set screws (8 total) both cross channels. Tighten All 8 Set Screws Allen Key STEP 9 #10 x 5/8" Attach the cross channels to the table. -
Page 7: Round Head
ASSEMBLY MultiTable Mod-E Pro Electric Standing Desk Frame STEP 11 M5x15 Attach the control unit using the two M5-15 Phillips round head screws. If attaching to a MultiTable Table Top: Control • Simply align with pre-drilled holes and attach. Unit If attaching to your own Table Top: •... -
Page 8: Hole Cover
MultiTable Mod-E Pro Electric Standing Desk Frame ASSEMBLY STEP 14 Test operation. buttons individually to test operation. End your test with the legs completely • Press the UP ▲ and DOWN ▼ lowered to the shortest position and unplug the power cord. - Page 9 OPERATION MultiTable Mod-E Pro Electric Standing Desk Frame Digital DOWN “SET” Button Display Button Button CAUTION: The resetting procedure must be completed before operating the desk. See Step 13 on page 7. Memory Buttons GENERAL OPERATION Desk movement stops when you Move the desk up or down by pressing UP ▲...
- Page 10 MultiTable Mod-E Pro Electric Standing Desk Frame OPERATION CHANGING THE HEIGHT DISPLAY UNITS This function allows you to change the display units from centimeters to inches or the other way around. • Press and hold S, then press and hold the DOWN ▼ button.
- Page 11 Quality Design | Free Shipping | 30-Day No Risk Returns | Over 37,000 Sold 855-469-6858 | customerservice@MultiTable.com | www.MultiTable.com MultiTable, LLC | 2255 W Desert Cove Ave., Suite E, Phoenix, AZ 85029 MultiTable Mod-E Pro Electric Standing Desk Frame - Assembly v-1.1...
Need help?
Do you have a question about the Mod-E Pro and is the answer not in the manual?
Questions and answers