Step 3: Attach Top Legs To Corners - Munchkin Nursery Essentials Organizer Owner's Manual

How To Install
2. Insert assembled metal tubes into the top
and bottom long sleeves (located on the front
and back of the unit).
3. Insert wooden dowels into the top and bottom
short sleeves (located on the sides).

STEP 3: ATTACH TOP LEGS TO CORNERS

1. Place top leg "A" in corner "A" with
the leg's wider holes facing the fabric.
6
2
3
1
C D B A
TIP:
Some force may be necessary to tighten the screws.
Turn the unit onto its side while tightening the screws
for greater rotational force.
2a. Insert the metal tube into the upper hole
of the leg, then secure from the other side
with a flat-bottom screw. Hold the metal tube
firmly to secure in place. Tighten using a
Phillips-head screwdriver.
2b. Insert the wooden dowel into the leg's other
hole, then secure with a wood screw. Hold the
wooden dowel firmly to secure in place. Tighten
using a Phillips-head screwdriver. Apply force
if needed.
Repeat Step 3 to attach top legs "B", "C" and "D" to the remaining corners.
How To Install
2a
2b
7