ABB NIBA-01 Installation And Startup Manual page 32

Chapter 6 – Communication
6-8
Initiate
Initiates communication between the InterBus-S host and the NIBA-01.
Initiate Request:
BYTE 1 BYTE 2
Command Code (008Bh)
Parameter Count
Invoke ID Comm.Ref.
Password Acc_groups
Initiate Response:
BYTE 1 BYTE 2
Command Code (00ABh)
Parameter Count
Invoke ID Comm.Ref.
Password Acc_groups
Initiate Indication:
BYTE 1 BYTE 2
Message Code (01ABh)
Parameter Count
Invoke ID Comm.Ref.
Version
Length Str. of Profile
Str. of Profile
Protection Password
Acc_groups
Initiate Confirmation (+):
BYTE 1 BYTE 2
Message Code (018Bh)
Parameter Count
Invoke ID Comm.Ref.
Result (+) Version
Version Length
String of Profile
Str. of Profile
Protection Password
Acc_groups
Example of an Initiate Request:
BYTE 1 BYTE 2
00 8B
00 02
00 eg. 02
00 00
Initiate Error Response:
BYTE 1 BYTE 2
Command Code (00ACh)
Parameter Count
Invoke ID Comm.Ref.
Add. Code
Initiate Confirmation (–):
BYTE 1 BYTE 2
Message Code (018Ch)
Parameter Count
Invoke ID Comm.Ref.
Result (–) Error Class
Error Code Send High
Send Low Receive High
Receive Low Su.Services
Supported Services
Supported Services
Su.Services
NIBA-01 Installation and Start-up Guide