Philips AVENT SCH580/20 User Manual page 9

 Turn the water tank upside down. Turn the tank cap anticlockwise to
remove it (1) and fill the tank with approx. 2 litres of clean water (2).
Tip: Use cold boiled water or distilled water. Make sure that the water
temperature does not exceed 40ºC.
Only put water in the water tank. Never put any additives, e.g. inhalants
or essential oils, in the water tank.
5 Put the tank cap back on the water tank (1) and turn the tank cap
clockwise (2) until it is tightly locked.
6 Put the water tank back onto the base and carefully align it in its
original position on the base.
The water tank is properly aligned when the run-time scale is on one line
with the on/off knob.
Water starts running into the water basin right away.
,
7 Put the tank cover back onto the water tank.
You can rotate the tank cover to place the mist outlet in the required
position.
8 Put the mains plug in the wall socket.
Do not use an extension cord.
9 Turn the on/off knob clockwise until you hear a click to switch
on the humidifier.
The power-on light goes on.
,
EngliSH
9