Advertisement
Standards and certificates
Life cycle
Disposal notes
Building Technologies Division
Applied directives:
Directive for gas-fired appliances
Electromagnetic compatibility EMC (immunity) *)
*) The compliance with EMC emission requirements must be checked after the burner control is
installed in equipment
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards / regulations:
Automatic burner control systems for burners and
appliances burning gaseous or liquid fuels
The relevant valid edition of the standards can be found in the declaration of
conformity!
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2008
ISO 14001:2004
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536
Identification code to EN 298
- Single-stage
- 2-stage
Burner controls has a designed lifetime* of 250,000 burner startup cycles which, under
normal operating conditions in heating mode, correspond to approx. 10 years of usage
(starting from the production date given on the type field).
This lifetime is based on the endurance tests in the standard EN 298.
A summary of the conditions has been published by the European Control
Manufacturers Association (Afecor) (www.afecor.org).
The designed lifetime is based on use of the burner controls according to the
manufacturer's Data Sheet. After reaching the designed lifetime in terms of the number
of burner startup cycles, or the respective time of usage, the burner control is to be
replaced by authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery
The unit contains electrical and electronic components and must not be disposed of
together with household waste. Local and currently valid legislation must be observed.
A M C L X N
A T C L X N
2009/142/EC
2004/108/EC
DIN EN 298:1994
5/15
CC1N7418en
21.06.2016
Advertisement
