Lumapower MRV-SideKick IV User Manual

MRV-SideKick IV
Lumapower Innovative Flashlight
User Manual
Welcome to Lumapower
Please take a moment to register
http://www.Lumapower.com (download the product registration form in the "download
page") It enables us to keep you posted on our latest advancements, and helps us to
better understand our customers and build products that meet their needs and
Expectations.
This product has been designed and manufactured to the highest quality standards.
However, if something does go wrong with this product, Lumapower and its national
distributors warrant free of charge labour and replacement parts in any country served by
(ver.1.1)
your product on our Web site at
an official distributor.
Unpacking: Check the product carefully. If it has been damaged in transit, report the
damage immediately by calling your dealer and/or the shipping company that delivered it.
Read Instructions. All the safety and operating instructions should be read before the
product is operated.
Follow Instructions. All operating and use instructions should be followed.
Replacement Parts. When replacement parts are required, be sure the replacement parts
have the same characteristics as the original part. Unauthorized substitutions may cause
damage to the unit.
Introduction
The Lumapower MRV-SIDEKICK IV supports input voltage from 3.6V to 12V. The MRV-
SIDEKICK IV is fitted with pure white LED module driven by a constant current regulation
circuitry to achieve a consistent level of light output for the useable life of the batteries.
Li-ion rechargeable : LumaPower only recommends the use of PCB protected batteries.
Combination Battery Type
1 Rechargeable 18650 (3.7V)
2 Rechargeable 18650 (3.7V)
3 Primary 123A (3.0V)
4 Primary 123A (3.0V)
Due to battery chemistry's limitations, 2 x CR123A only for emergency backup and

won't offer max. output at all levels.
Convertible Design
The MRV-SIDEKICK IV can be operate with 2x18650 ,
Reflectors/LED engine module can be easily upgrade.
The MRV-SIDEKICK IV features a forward clicky switch and multi-level SideKick control
circuit with memory functions. Half-press the tail switch to power ON MRV-SIDEKICK
momentary, full press to lock it for constant ON. Cycle press the SideKick to select output
mode.
Convertible Design
The MRV-SIDEKICK IV can be operate with 2x18650 ,
Reflectors/LED engine module can be easily upgrade.
Pcs
1
2
2
4
(with M-65 battery tube installed).
(with M-65 battery tube installed).