Kenmore 795.7944 Series Use & Care Manual page 16

Table of Contents

Advertisement

Available languages

Available languages

REFRIGERATOR INSTALLATION
4. Remove the four screws (1), the hinge pin insert (2) and
the hinge pin brackets (3) from the bottom right side of
the door.
5. Reinstall the hinge pin brackets (1), screws (2) and hinge
pin insert (3) on the bottom left side of the door.
(3)
(2)
NOTE: Before removing the freezer door, make sure you
completely remove the refrigerator door.
6. Use a ¼ inch hex socket wrench to loosen and remove
the hinge pin (1) from the middle hinge bracket. Use a
10 mm or 13/32 in. socket wrench to remove the two
bolts (2). Remove the screw (3) and set the middle hinge
bracket (4) and other parts aside.
(2)
(3)
(2)
(1)
(1)
(3)
(4)
(1)
7. Carefully lift up the freezer door. Remove and place it
on a non-scratching surface.
8. Using a ¼ in. socket wrench, loosen and remove
the.8hinge pin from the bottom hinge.
9. Using a 13/32-inch or 10mm socket wrench with a 2 in.
extension and a screwdriver, loosen the two bolts and
the screw, and remove the bottom hinge on right side.
10. Remove the four screws (1), the hinge pin brackets (2)
and the hinge pin insert from the bottom right side of
the freezer door.
16
Bottom Hinge
Pin
Bottom Hinge Pin
Screw
Bolts
(2)
(3)
(1)

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

795.7941 series

Table of Contents