Technical Data - Husqvarna DMT 700 Operator's Manual

Technical data

Saw feature
Blade guard capacity, mm/inch
Maximum cutting depth, mm/inch
Max. bladeshaft rpm
Approximate blade shaft output, hp/kW
Arbor size, mm/inch
Quick disconnect blade flange Ø, mm/inch
Blade shaft diameter, mm/inch
Blade shaft bearings
Blade shaft drive
Blade coolant
Blade guard attachment
Blade control
Axle Ø, mm/inch
Wheels, mm/inch
Transmission
Max. ground speed
Chassis
Weight (uncrated), kg/Ib
Maximum operating mass, kg/Ib
TECHNICAL DATA
Cast sealed blade shaft with 4 maintenance-free ball bearings
Dual 4-rib banded 3VX V-belts per side (16 ribs total)
Electro-hydraulic pump raises blade; Switch controlled raise/lower on speed control
handle; Depth stop and cutting depth indicator.
Rear, easy adjust center pivot with 2 hydraulic powered wheel motors
Front, 203x76x25/8x3x1, thick polyurethane tread, sealed ball bearing requiring less
Rear, 254x76x32/10x3x1.25, solid rubber, quick disconnect
Hydrostatic pump, with 2 hydraulic wheel motors connected with hoses,neutral start
switch, single handle speed control, hydraulic bypass valve for pushing
Infinitely variable: 0-250 fpm / 0-76m/min forward and reverse. 25m/min maximum
reverse speed on CE models.
Heavy duty, rigid, box and channel section construction
900/36
900/36
355/14
1150
68/50
35/1.38 with 6 Drive pins
203.2/8
57/2.25
Zinc-plated dual nozzles
Bolt on
Front, 25.4/1
maintenance
1150/2535
1300/2866
– 43
English